Goldwing skrev:
C 3 er bedere ifølge Castro se.
http://goldwing1500.dk/Peugeot.htm
Det afviser jeg ikke, men det er ikke den type Peugot siger der skal bruges.
Her er hvad olitype Peugot siger der skal anvendes:
PSA Peugeot-Citroën Oil SpecificationsThe French PSA group issued a set of oil specifications in 2009 in order to exercise greater control over the motor oils used in their vehicles. All specifications are based on ACEA specs but also require further conditions to be met.
PSA B71 2290
Peugeot/Citroën engine oil specification introduced in 2009. B71 2290 is a low-SAPS oil intended for engines with diesel particulate filters and with Euro 5 emission standards. General specifications are: ACEA C2 or C3 with additional PSA tests.
PSA B71 2294
Peugeot/Citroën engine oil specification introduced in 2009. Main specification: ACEA A3/B4 with additional PSA tests.
PSA B71 2295
Peugeot/Citroën engine oil standard for engine before MY 1998. General specification: ACEA A2/B2.
PSA B71 2296
Peugeot/Citroën engine oil specification introduced in 2009. General specifications: ACEA A3/B4 + additional PSA tests.
Her hvordan ACEA Beskriver de forskellige olier, så kan du selv afgøre om hvad der er bedst. Fakta er dog at C2, er godkendt af Peugeot, og C3 er til wv, og andre.
C1 Stable, stay-in-grade oil intended for use as catalyst compatible oil in vehicles with DPF and TWC in high performance car and light van diesel and gasoline engines requiring low friction, low viscosity, low SAPS oils with a HTHS higher than 2.9 mPa.s. These oils will increase the DPF and TWC life and provide fuel economy benefit.
Warning: these oils have the lowest SAPS limits and may be unsuitable for use in some engines. Consult owner manual or handbook if in doubt.
C2 Stable, stay-in-grade oil intended for use as catalyst compatible oil in vehicles with DPF and TWC in high performance car and light van diesel and gasoline engines designed to be capable of using low friction, low viscosity oils with a HTHS higher than 2.9 mPa.s. These oils will increase the DPF and TWC life and provide fuel economy benefit.
Warning: these oils may be unsuitable for use in some engines. Consult owner manual or handbook if in doubt.
C3 Stable, stay-in-grade oil intended for use as catalyst compatible oil in vehicles with DPF and TWC in high performance car and light van diesel and gasoline engines. These oils will increase the DPF and TWC life.
Warning: these oils may be unsuitable for use in some engines. Consult owner manual or handbook if in doubt.
C4 Stable, stay-in-grade oil intended for use as catalyst compatible oil in vehicles with DPF and TWC in high performance car and light van diesel and gasoline engines requiring low SAPS oil with HTHS higher than 3.5mPa.s. These oils will increase the DPF and TWC life.
Så du kan godt bruge en C3 olie hvis Peugeot har godkendt den.
